Fixing for Orbi RBR50 setup need to be put properly to make sure Wi-Fi coverage in your home is maximized. It has to be installed in a central area that is elevated and not too close to walls where interference from electronic devices could occur. Satellites should be synched in open areas so that mesh extension could proceed smoothly. Run speed tests through the Orbi app after updating the firmware, and tweak any settings such as SSIDs or passwords if needed. Smart Connect should also be enabled, so devices bounce between bands seamlessly. On top of everything else, it is best to reboot the system from time to time and look for newer firmware updates. Good Wi-Fi coverage accepted in your home is what an Orbi RBR50 system strives to yield using this set of recommendations.
